สำหรับข้อต่อและการเสริมแรงเฉือน
Dextra Pressed Connection (PC) Headed Bars are designed for anchoring shear and shear load-bearing steels, as an alternative to bends and hooks.
They make the installation of transverse reinforcement faster and
less tiring, especially in thick structures or where access from one
side is difficult.
They also eliminate the need to bend the steel on-site, where
conditions may not always allow for the minimum bend diameters
required by standards.
PC Headed Bars are CARES approved to the CARES criteria TA1-B and the nuclear product specification TA1-C (Class A)
คุณสมบัติของสินค้า
- Dextra PC Headed Bars provide an alternative to bends,
hooks and loops for the anchorage of reinforcement. - Headed Bars are available in 5 rebar diameters ranging
from Ø10 to Ø20 mm for links, ties or shear reinforcement. - Net Bearing Area ≥ 9 x rebar cross section area, complying with the requirements of FIB Model Code 2010
- Achieved a full “bar break” level of performance when loaded in tension to destruction, it will be the rebar that fails away from the influence of the head or connection.
ลดความแออัด
และอนุญาตให้ใช้เหล็กเส้นที่ใหญ่ขึ้นได้
ติดตั้งภายในไม่กี่วินาที
fasten the construction cycle
No bending
on-site
where conditions may not always allow
ประโยชน์
- Faster installation on site.
- Eliminates factory and site rebar bending.
- Allows for the reduction of links by using larger diameter rebar with increased spacing, but without the associated congestion.
โครงการที่เกี่ยวข้อง
โซลูชั่นที่เกี่ยวข้อง
ความเชี่ยวชาญ
ในทุกช่วงเวลาของการเดินทางของลูกค้า ทีมงาน Dextra อุทิศตนเพื่อการผลิตโซลูชันการก่อสร้างอัจฉริยะที่ช่วยให้ลูกค้าของเราเข้าถึงระดับการผลิตและความปลอดภัยที่สูงขึ้นในสถานที่ก่อสร้างของพวกเขา
Dextra ถือหุ้นทางกายภาพในหลายทวีป พร้อมด้วยสินค้าคงคลังในท้องถิ่นของผู้จัดจำหน่ายของเราเสริมในแต่ละประเทศ ด้วยเครือข่ายที่ขยายออกไปนี้ Dextra ทำให้แน่ใจว่าผลิตภัณฑ์ของเราจะเข้าถึงได้เสมอไม่ว่าพันธมิตรของเราจะอยู่ที่ใดก็ตาม
สำหรับโซลูชันที่ต้องปรับแต่ง Dextra ยังสามารถดำเนินการเกินเวลาจัดส่งมาตรฐานของเราและเสนอแผนการจัดส่งแบบเร่งด่วนได้อีกด้วย ปรึกษาเราสำหรับข้อมูลเพิ่มเติม
จากแหล่งอุตสาหกรรมหลัก 3 แห่งที่ตั้งอยู่ในกรุงเทพฯ (ประเทศไทย) กวางโจว (จีน) และปูเน่ (อินเดีย) Dextra เป็นเจ้าของสิ่งอำนวยความสะดวกและกระบวนการผลิตโดยสมบูรณ์ สิ่งนี้ช่วยให้เราสามารถควบคุมระยะเวลาในการดำเนินงานและคุณภาพของโซลูชั่นที่ผลิตได้อย่างสมบูรณ์
ห้องปฏิบัติการทดสอบวัสดุที่ได้รับการรับรองอย่างอิสระ ซึ่งได้รับการรับรองมาตรฐาน ISO-IEC17025 ตั้งอยู่ที่โรงงานหลักของ Dextra ในกรุงเทพฯ เพื่อให้สามารถทดสอบวัสดุและผลิตภัณฑ์ได้
Dextra มุ่งหวังที่จะจัดหาผลิตภัณฑ์ที่ได้รับการรับรองทางเทคนิคระดับสากลที่มีความต้องการมากที่สุด และเป็นเป้าหมายของเราในการสร้างความพึงพอใจสูงสุดของลูกค้าโดยปฏิบัติตามความต้องการของลูกค้าและข้อกำหนดที่ระบุ