For links and shear reinforcement
Dextra Pressed Connection (PC) Headed Bars are designed for anchoring shear and shear load-bearing steels, as an alternative to bends and hooks.
They make the installation of transverse reinforcement faster and
less tiring, especially in thick structures or where access from one
side is difficult.
They also eliminate the need to bend the steel on-site, where
conditions may not always allow for the minimum bend diameters
required by standards.
PC Headed Bars are CARES approved to the CARES criteria TA1-B and the nuclear product specification TA1-C (Class A)
Product features
- Dextra PC Headed Bars provide an alternative to bends,
hooks and loops for the anchorage of reinforcement. - Headed Bars are available in 5 rebar diameters ranging
from Ø10 to Ø20 mm for links, ties or shear reinforcement. - Net Bearing Area ≥ 9 x rebar cross section area, complying with the requirements of FIB Model Code 2010
- Achieved a full “bar break” level of performance when loaded in tension to destruction, it will be the rebar that fails away from the influence of the head or connection.
Reduce congestion
and allow the use of larger rebar.
Install in a few seconds
fasten the construction cycle
No bending
on-site
where conditions may not always allow
Benefits
- Faster installation on site.
- Eliminates factory and site rebar bending.
- Allows for the reduction of links by using larger diameter rebar with increased spacing, but without the associated congestion.
Related Projects
Related solutions
Expertise
At every moment of your customer journey, Dextra teams dedicate themselves to the production of smart construction solutions that allow our customers to reach higher productivity and safety levels on their construction sites.
Dextra holds physical stocks on several continents, complemented in each country by the local inventories of our distributors. With this extended network, Dextra makes sure our products are always at reach no matter where our partners are.
For solutions that require to be customized, Dextra can also go beyond our standard delivery times and offer accelerated delivery schemes. Consult us for more information.
From 3 major industrial sites located in Bangkok (Thailand), Guangzhou (China), and Pune (India), Dextra completely owns its manufacturing facilities and processes. This allows us to have complete control over the timing of our operations and the quality of the solutions produced.
An independently accredited material testing laboratory, accredited to ISO-IEC17025, is located at Dextra’s main Bangkok factory, allowing the testing of material and products.
Dextra aims to supply products that exceed the most demanding international technical approvals and it is our goal to create maximum customer satisfaction by complying with our clients’ needs and specified requirements.