RepairGrip ®

Swaged coupler for repair applications

The RepairGrip system is a portable system designed to splice bars in situ. It is a simple and proven method to splice bars that did not have their end shop-prepared.

The RepairGrip sleeve is swaged onto the bar ends by a hydraulic tool powered by a separate power unit.

The resulting connection guarantees a tensile strength of at least 125% of the nominal yield strength of reinforcing bars grade 500 MPa.


Product features

  • RepairGrip system can splice bars from diameter Ø 12mm to 40mm.
  • RepairGrip splices put rebar ends butt-to-butt, making the solution suitable for tension and compression applications.
  • No reduction of the cross section of the bar.
  • Individual marking of each sleeves to allow for full traceability.
  • RepaiGrip equipment supplied by Dextra.


No rebar preparation required
No rebar preparation required
Simple operation with Dextra supplied equipment
Productive solution
Productive solution
Ideal for sites where numerous bars need to be reworked
Close to you
Close to you
RepairGrip is available via Dextra or our local distributors. Contact us for more info.

Main benefits

  • No rebar preparation required.
  • Minimal rebar length required. Ideal for coordination issues when rebar protruding length from foundation piles is insufficient to perform standard overlap.
  • Supported by a Dextra-supplied equipment.


At every moment of your customer journey, Dextra teams dedicate themselves to the making of smart construction solutions that allow our customers to reach higher productivity and safety level on their construction sites.

Learn more

Network & Services

Network - Dextra holds physical stocks on several continents, complemented in each country by the local inventories of our distributors. With this extended network, Dextra make sure our products are always at reach and available in reasonable times.

Delivery - For solutions which required to be customized for each project, Dextra can also go beyond our standard delivery times and offer accelerated delivery schemes. Consult us for more information.

Learn more

Manufacturing capabilities

From 3 major industrial sites located in Bangkok (Thailand), Guangzhou (China) and Mumbai (India), Dextra completely owns its manufacturing facilities and processes. This allows us to have complete control over the timing of our operations and the quality of the solutions produced.

Learn more

Testing facility

An independently accredited material testing laboratory, accredited to ISO-IEC 17025, is located at Dextra’s main Bangkok factory, allowing the testing of material and products.

Learn more

Quality & Certifications

Dextra aims to supply products that exceed the most demanding international technical approvals and it is our goal to create maximum customer satisfaction by complying with our clients’ needs and specified requirements.

Learn more

Don't have an account yet? Register Now!
Equipment Spare Part Manual Log in

Sign in to your account